This is a platform alteration Part 2

After building the platforms out of Balsa and MDF, I was still unhappy with the finish of the platforms. I have since attempted construction with some wall filler material to create a flat surface. I created a mould using insulation tape to hold the filler and to help me give the platforms a uniform height. I think you will agree that the outcome looks pretty ok. There is only one end of the station that fouled a locomotive on a test run which will be rectified once the filler has completely set.
The raised section of the platform; this will soon be sanded flat.

Overall view of the station.

Carriages using the newly created platform 2.
 Below is an image of all of the rolling stock with a new addition to the railway, the embankment where I am going to build a small mine railway which will have an interchange with the siding at Effans Uchaf. This is a rather large divergence from my original plan but I have borrowed the idea from "Lower Peak Wharf" The layout that first inspired me to explore 009. I have only built the embankment on the station side for now, but will be adding more to the western side of the bridge in due course. 

A busy scene at Effans Uchaf with the newly created platforms playing host to all of the passenger rolling stock.

Comments

Post a Comment

Popular posts from this blog

Coachworks Update

Image
 Life has returned to some normality now and I have been able to find some time to work on the coaches. The Dundas Vale of Rheidol Carriages have languished on my "to-do" pile for some time since I started the process of changing the kit bogies for the more reliable Peco RTR examples. My original rationale for using these bogies was to give the coaches more consistent running and to rationalise the couplings across the whole fleet.  I had originally just drilled a 4mm hole in the floor which helped but I had not accounted for the excess material on the original axles. I filed the material away and constructed new collars out of styrene to mount the bogies into. I re-drilled the holes to 5mm and added the 4mm collar melting it onto the floor with poly-cement. My hope was that it would be more secure.  Coaches 2 and 3 were given this treatment and the carriages were finished with glazing and the rooves being attached. Coach 4 was an attempt that had not gone to plan with my...
Read more

Fletcher Number 4

Image
 After the successes with the coaches, I decided that it was high time that the fourth Fletcher Jennings locomotive was given some attention. I had been soaking it in strip-magic, primed it and then left it whilst I focussed on the coaches. I know that nowhere had a fourth Fletcher but I think that my railway would benefit from a third of these amazing looking machines.  I planned to attempt to recreate the Penrhyn livery. I wanted to try reverse masking and this was the perfect opportunity to give it a go. I masked up the boiler and the sides of the cab.  As you can see the results look pretty good. I have actually accidentally created a version of the Lancashire and Yorkshire livery. I still need to work on the running plate and cylinders to make them match the work that I have done so far.  I have taken all the masking tape off the locomotive and it looks well for my first attempt at reverse-masking. I plan to paint the running board black and the cylinders to mat...
Read more

Restoration and new carriage

Image
The restoration of the observation carriage is coming on quite well. 12 hours in some paint stripper and the gentle application of sandpaper has yielded some of the original metal of the model. Thanks to the power of Social Media, I have been able to ascertain that the kit is possibly an old Green Arrow kit, which is rare apparently.  I have strengthened the sides of the guards compartment, repaired the damage to the Guard's compartment and will construct a new roof from styrene when I get back off my summer holiday. At present the carriage has been undercoated in the usual black undercoat and will be painted to match it's partner carriage.  Which brings me onto the fourth large carriage of the fleet. I purchased another Vale of Rheidol Carriage with the intention of emulating Carriage 24 from the Welsh Highland Railway. I was considering making it from scratch but I enjoy constructing the Vale of Rheidol carriages too much. I am not in the business of accurately re...
Read more